Cmosis support

HomeNanEye GSNan Eye GS SensorDeserealization

1.4. Deserealization

The Sensor Continuous data output Mode enabled by setting Register address 0x01 bit 7 = 0 is not available , so the training sequence between each row cannot be removed . This compromises the use of an (off the shelf) deserializer . Awaiba recommendation is to implement FPGA deserialization .   An alternative would be implement a Valid Line valid control signal  , since the Row training pattern is a fixed signal , this could be discarded for each row when reading the deserializer output signal  . 

FPGA recommendation:

Deserializer recommendation:

 

 

Downloads

This page was: Helpful | Not Helpful