Cmosis support

HomeDragsterSensorBlooming

5.14. Blooming


Blooming resistance of Dragster sensors is extremely high.

Indeed, each pixel is isolated form the other with a specific charge drain, thus blooming from line one to line 2 can not be observed.

If a large part of the sensor is overexposed, one can see a small effect to the un or low exposed pixels of this very same line, however this effect is not due to pixel Blooming , but due to an electrical crosstalk on the ADC reference. (this is a known effect we doubted "horizontal crosstalk".

Provided that the reset time (time reset_CVC =1) and the minimum sampling time (time SAMPLE = 1) are respected as specified, there is no image lag, or blooming from line N to line N-1 or N+1.

This page was: Helpful | Not Helpful