Cmosis support

HomeNanEyeNanEye Viewer SoftwareAutomatic Exposure Control - Gain and Exposure values

13. Automatic Exposure Control - Gain and Exposure values

Please check the Automatic Control, General tab, click on Show ROI and you will have on the bottom of the image 4 blue lines which represents the gain (each line is a gain value) and the yellow line the exposure value.

Please have a look in the attached examples.

Example 1: Gain 1 and Exposure approximately 200.

Example 2: Gain 3 and Exposure approximately 222.

Downloads

This page was: Helpful | Not Helpful