Cmosis support

HomeDragsterEvalBoardI can't grab images or they are corrupted, what to do?

4.6. I can't grab images or they are corrupted, what to do?

All Evaluation Boards are configured and tested prior to shipping, so it's guaranteed that the system works with the sensor required.

Before getting in contact with Awaiba support team, please check the following points:

 - use the stock power supply or, if possible, a laboratory power supply with 12V output and at least 2A current limitation

 - check all cable connectivity and if the Green LED in the Power board is "ON".

 - check the grabber configuration options according to sensor readout methods

 

In case the problem is found in the sensor or with the power board or in case the Eval Board is malfunction, please get in contact with Awaiba's support team.

This page was: Helpful | Not Helpful